
                    CrownAdmin for UNIX              
                    Sun/SPARC SunOS 4.1.x
                        Installation
                        ============


CrownAdmin allows you to configure your QMS printer and
perform network operations on printers connected to Ethernet 
and Token-Ring networks.

This readme file describes how to install CrownAdmin  for 
UNIX on a Sun/SPARC SunOS 4.1.x system from a CD-ROM.

>> Note: QMS provides CrownAdmin software in several
   different media formats. If you require CrownAdmin on some
   other media than CD-ROM, contact your QMS vendor. 

   You can also download CrownAdmin via our World Wide Web Server
   at http://www.qms.com or CompuServe at go qmsprint


Installation
------------
 1 Insert the CD-ROM in the CD-ROM drive.
   
   >> Note: Some CD-ROM drives require that the disk be
      placed in a caddy before being inserted in the drive. 
      Check your CD-ROM documentation for information. 

 2 Logon the UNIX system as root.

 3 Type the following command to go to the root directory:

      cd / 

 4 If you already have a directory on the system named cdrom,
   skip to step 5.

   If you don't have a directory on the system named cdrom,
   type the following command to make one:

      mkdir /cdrom

 5 Mount the CD-ROM file system:

      mount -r -t hsfs device_filename /cdrom

   For device_filename substitute the complete pathname of
   the device associated with the CD-ROM drive. On SunOS
   systems, device_filename is usually /dev/sr0. If it 
   isn't, check your SunOS system documentation.

 6 Verify that the CD-ROM file system has been mounted by
   listing the contents of the directory:

      ls /cdrom

   The directory contains several subdirectories,
   including unix.

 7 Change to the location in which you want the
   CrownAdmin directory to be created.

   >> Note: The directory in which crnadm.exe resides must 
      be able to be mounted by all network nodes that need 
      to access the printer.

 8 Extract the files from the CD-ROM:

      tar xvf /cdrom/platform/unix/crnadm/sunos/ca_sunos.tar

   This creates a crnadm directory containing CrownAdmin.

 9 When the installation is complete, choose Cancel, and then
   choose Exit this CD-ROM.

10 Unmount the CD-ROM file system: 

      umount device_filename

   For device_filename, substitute the complete pathname of 
   the device file associated with the CD-ROM drive.

11 Add the name of the directory containing crnadm (the 
   directory in which you extracted the ca_sunos.tar file)
   to your path. 

12 Refer to the "QMS CrownNet Setup Guide" to configure the
   CrownNet interface and the network.

13 Run CrownAdmin by typing 

      ./crnadm

>> Note: See the on-line user's guide for more information 
   on CrownAdmin (from the Help menu in the main 
   CrownAdmin window choose Contents).



Trademarks
----------
QMS and CrownNet are registered trademarks and CrownAdmin is a 
trademark of QMS, Inc.

All other trademarks and registered trademarks are the property 
of their respective owners: Sun, SPARC, SunOS/Sun; CompuServe/
H&R Block.

Copyright (c) 1998 by QMS, Inc. All Rights Reserved.
QMS P/N 1810023-001C