        **************************************************
                      Firmware Update Tool
                        Version 1.10.0.a
        **************************************************
                  『 はじめにお読みください 』
                                                                 2025年3月

このファイルには、ご使用にあたっての注意事項が記述されております。
必ずお読みください。

１．ソフトウェアの説明

    Firmware Update Tool は、お客様のネットワーク上にある複数の機器（デジタル複合機、プリンター）
に対して以下の処理を行います。

      - ファームウェアの更新
      - アプリケーションの更新

    対応言語は以下の通りです。

      - 英語
      - 日本語


２．動作環境

    ＣＰＵ:          1GHz以上
    メインメモリ     Windows 10：2GB以上
                     Windows 11：4GB以上
    ディスプレイ     1280x600ドット以上
    ＯＳ:            Windows 10 Home (32-bit/64-bit)
                     Windows 10 Pro (32-bit/64-bit)
                     Windows 10 Enterprise (32-bit/64-bit)
                     Windows 11 Home (64-bit)
                     Windows 11 Pro (64-bit)
                     Windows 11 Enterprise (64-bit)



３．インストール及び起動方法

    <インストール方法>
      - 自己解凍形式でアーカイブされたファイル exe を実行し展開します。

    <起動方法>
      - 展開されたフォルダにある exe を実行します。

    <旧バージョンからの引き継ぎ>
      - 機器リスト
      - 環境設定情報

    <制限事項>
      - ユーザー権限
          一般ユーザー (Administrator権限は必要ありません）

      - 展開フォルダのアクセス許可
          フルコントロール（読み込み、書き込み、変更、実行）が必要です。

      - ネットワークフォルダに当ツールを配置して実行はできません。

      - Firmware Update Toolを１つのOS上で同時に２つ動作させることは
        できません。


４．注意事項

    - Firmware Update Toolで一度に処理することができる機器は1000台です。
    
    - 機器の検索は、IPv4アドレスをサポートします。
 
    - WindowsのTLS1.0が無効になっているときは、機器と通信できないことがあります。以下の手順に従ってインターネットオプションを設定してください。
      
      Windows 10の場合
        1. Windowsの［スタート］ボタンをクリックします。
        2. ［Windows システムツール］をクリックします。
        3. ［コントロールパネル］をクリックします。
        4. 「表示方法:」で［カテゴリ］を選択します。 
        5. ［ネットワークとインターネット］をクリックします。
        6. ［インターネットオプション］をクリックします。
        7. 「インターネットのプロパティ」ダイアログで［詳細設定］タブをクリックします。
        8. 「TLS1.0を使用する」、「TLS1.1の使用」、「TLS1.2の使用」にチェックが入っていないときはチェックを入れて、［OK］をクリックします。
        9. 「ネットワークとインターネット」画面の右上の［×］をクリックします。
      
      Windows 11の場合
        1. Windowsの［スタート］ボタンをクリックします。
        2. ［すべてのアプリ］をクリックします。
        3. ［Windows ツール］をクリックします。
        4. ［コントロールパネル］をダブルクリックします。
        5. 「表示方法:」で［カテゴリ］を選択します。 
        6. ［ネットワークとインターネット］をクリックします。
        7. ［インターネットオプション］をクリックします。
        8. 「インターネットのプロパティ」ダイアログで［詳細設定］タブをクリックします。
        9. 「TLS1.0を使用する」、「TLS1.1の使用」、「TLS1.2の使用」にチェックが入っていないときはチェックを入れて、［OK］をクリックします。
        10. 「ネットワークとインターネット」画面の右上の［×］をクリックします。
 
      ファームウェアやアプリケーションの更新などの処理が完了したら、必要に応じてインターネットオプションの設定を元に戻してください。
 
    - 特注モジュールや個別対策モジュールがインストールされている機器については、本ツールでファームウェアやアプリケーションを更新できません。
 
５．おことわり

・コンピューターウィルス、ワーム、その他の有害なソフトウェアなどに対する予防措置は、お客様の責任で必ず講じてください。
・本ツールの故障による損害、文書やデータの消失による損害、その他本ツールの使用により生じた損害について、当社は一切その責任を負えませんのであらかじめご了承ください。
・本文書の内容に関しては、将来予告なしに変更することがあります。
・本文書の一部、または全部を無断で複写、複製、改変、引用、転記することはできません。
・本ツール及び使用説明書を運用した結果の影響については、一切責任を負いかねますのでご了承ください。
・本ツールでファームウェアやアプリケーションを更新しても、使用している機種や機器の構成によって、更新または適用されない機能があります。

==========================================================================

製品のバージョンアップ、対応機種等に関する最新情報は､弊社ウェブサイトを
ご覧ください｡



※Microsoft、Windows は、米国Microsoft Corporationの米国および
  その他の国の登録商標です。
※その他、記載の会社名、商品名は各社の商標、または登録商標です。

※Firmware Update Toolでは、以下のOSSソフトウェアを利用しています。

-----------------------------------------------------------------------
１．libexpat 2.6.3 について
-----------------------------------------------------------------------

http://www.libexpat.org/

Copyright (c) 1998-2000 Thai Open Source Software Center Ltd and Clark Cooper
Copyright (c) 2001-2022 Expat maintainers

Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-----------------------------------------------------------------------
２．zip32 3.0 と unzip32 6.0 について
-----------------------------------------------------------------------

http://www.info-zip.org

Copyright (c) 1990-2009 Info-ZIP.  All rights reserved.

For the purposes of this copyright and license, "Info-ZIP" is defined as
the following set of individuals:

   Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
   Jean-loup Gailly, Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth,
   Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,
   David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,
   Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,
   Kai Uwe Rommel, Steve Salisbury, Dave Smith, Steven M. Schweda,
   Christian Spieler, Cosmin Truta, Antoine Verheijen, Paul von Behren,
   Rich Wales, Mike White.

This software is provided "as is," without warranty of any kind, express
or implied.  In no event shall Info-ZIP or its contributors be held liable
for any direct, indirect, incidental, special or consequential damages
arising out of the use of or inability to use this software.

Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the above disclaimer and the following restrictions:

    1. Redistributions of source code (in whole or in part) must retain
       the above copyright notice, definition, disclaimer, and this list
       of conditions.

    2. Redistributions in binary form (compiled executables and libraries)
       must reproduce the above copyright notice, definition, disclaimer,
       and this list of conditions in documentation and/or other materials
       provided with the distribution.  Additional documentation is not needed
       for executables where a command line license option provides these and
       a note regarding this option is in the executable's startup banner.  The
       sole exception to this condition is redistribution of a standard
       UnZipSFX binary (including SFXWiz) as part of a self-extracting archive;
       that is permitted without inclusion of this license, as long as the
       normal SFX banner has not been removed from the binary or disabled.

    3. Altered versions--including, but not limited to, ports to new operating
       systems, existing ports with new graphical interfaces, versions with
       modified or added functionality, and dynamic, shared, or static library
       versions not from Info-ZIP--must be plainly marked as such and must not
       be misrepresented as being the original source or, if binaries,
       compiled from the original source.  Such altered versions also must not
       be misrepresented as being Info-ZIP releases--including, but not
       limited to, labeling of the altered versions with the names "Info-ZIP"
       (or any variation thereof, including, but not limited to, different
       capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the
       explicit permission of Info-ZIP.  Such altered versions are further
       prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP
       e-mail addresses or the Info-ZIP URL(s), such as to imply Info-ZIP
       will provide support for the altered versions.

    4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip,"
       "UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its
       own source and binary releases.

-----------------------------------------------------------------------
３．SnmpGet 1.01 について
-----------------------------------------------------------------------

Copyright (C) 2009 SnmpSoft Company. All Rights Reserved.

FREE USE LICENSE. You  may install  and use  any number of copies
of  this  SOFTWARE  on your  devices  free of  charge.  You  must
distribute  a copy of  this license  within  ReadMe.txt file with
any  copy of the SOFTWARE and  anyone to whom you  distribute the
SOFTWARE is subject to this license.

RESTRICTIONS.  You may not  reduce the SOFTWARE to human readable
form,  reverse engineer,  de-compile,  disassemble, merge,  adapt,
or modify the SOFTWARE, except  and only to  the extent that such
activity is expressly permitted by applicable law notwithstanding
this  limitation.  You may not rent, lease,  or lend the SOFTWARE.
You may not use the SOFTWARE to perform any unauthorized transfer
of  information,  such  as  copying  or  transferring  a  file in
violation of a copyright, or for any illegal purpose.

NO WARRANTIES.  To the maximum extent permitted by applicable law,
SnmpSoft Company  expressly   disclaims  any  warranty  for  this
SOFTWARE. The SOFTWARE and any related documentation are provided
"as is" without warranty  of any kind,  either express or implied,
including,   without  limitation,  the  implied   warranties   of
merchantability  or fitness for a particular  purpose. The entire
risk  arising out of use or performance  of the  SOFTWARE remains
with you.

-----------------------------------------------------------------------
４．boost 1.66 について
-----------------------------------------------------------------------

https://www.boost.org/

Boost Software License - Version 1.0 - August 17th, 2003

Permission is hereby granted, free of charge, to any person or organization
obtaining a copy of the software and accompanying documentation covered by
this license (the "Software") to use, reproduce, display, distribute,
execute, and transmit the Software, and to prepare derivative works of the
Software, and to permit third-parties to whom the Software is furnished to
do so, all subject to the following:

The copyright notices in the Software and this entire statement, including
the above license grant, this restriction and the following disclaimer,
must be included in all copies of the Software, in whole or in part, and
all derivative works of the Software, unless such copies or derivative
works are solely in the form of machine-executable object code generated by
a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.

-----------------------------------------------------------------------
５．json 3.11.3 について
-----------------------------------------------------------------------

https://github.com/nlohmann/json

Copyright (c) 2013-2022 Niels Lohmann

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

-----------------------------------------------------------------------
６．microtar 0.1.0 について
-----------------------------------------------------------------------

https://github.com/rxi/microtar

Copyright (c) 2017 rxi

Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the "Software"), to deal in
the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

                   Copyright (C) 2021-2025 RICOH CO., LTD. All rights reserved.

